Want maximum security in your home or office? Well, start by correctly installing your CCTV system. With properly installation, you will optimize the performance of your CCTV systems. However, installing CCTV is technical in nature. Plus, it can be challenging—especially if you are new to CCTV installation. Luckily, this article contains all you need to know about CCTV installation—including practical tips for setting up your system. Keep reading!
Contents
Check the Camera’s Power Rating
Know the power of your CCTV camera. Also, be sure to purchase your electrical components from regulated suppliers. Ensure they have the right tolerance. The camera should possess at least 40 percent of the required power supply. This will play a key role when it comes to heat loss as well as overheating. Also, use a power cable that has the required thickness. It will help prevent voltage drop—especially when it comes to long distances. Check the polarity of the wires that connect to the camera. It’s also important to check that the camera has the right cooling system as well as ventilation. Don’t operate a CCTV equipment on power circuits like compressors, elevators, as well as generators.
Get Expert Cabling
The benefits of doing proper cabling cannot be underestimated. Don’t run your video cables with those of the SAC power—particularly those carrying heavy current. Don’t let the RG59U Co-Ax runs go beyond 200m and 350m for color plus B/WA respectively.
Avoid things like sharp bends when doing your cable installation. Don’t over tighten the cable-ties. Also, say no to wire-stripping. Other measures that should be observed during installation include:
- Properly crimping the BNC Connectors
- Use a good Rubber RNC Boots when crimping the BNC connectors
- Label all your signal cables
- Label all the camera cables
Perform a Comprehensive Test
Be sure to test everything before installation. This will help you ascertain the working conditions of the sub-sections before carrying out the installation process. Use the CAT-5 or even EIA rated cabling for all your PTZ communication needs. Also, you should designate enough space for your camera. Similarly, the lens and connectors require enough space. Don’t position the camera in direct sunlight. Remember, sunlight tends to raise the equipment temperature—which can play a role in reducing your system’s lifespan.
Don’t put your camera where they can be accessed by thieves. Also, don’t install cameras too high—it may interfere with the quality of the images.
Other Tips
The following are additional tips you can use when installing your CCTV cameras:
- Taker enough time when doing lapse VCR considerations
- Proper wireless connections
- Have a digital video recorder in place.
The Bottom-Line
Install your CCTV like a pro. Remember, how you install your CCTV plays a key role as far as the security of your home or office is concerned. So, if you want to secure your home, think in terms of installing it right. The above are simple tips you can use to install your CCTV for maximum security. For more information, follow this link https://network-data-cabling.co.uk/ip-security/cctv-installation/.